unisonic technologies co., ltd U74HC4053 cmos ic www.unisonic.com.tw 1 of 9 copyright ? 2009 unisonic technologies co., ltd qw-r502-373.a triple 2-channel analog multiplexer/ demultiplexer ? description the utc U74HC4053 is a high-performance, triple 2-channel analog multiplexer/de-multiplexer. ? features * wide analog input voltage range from -5v to +5v * low on-state resistance * logic level translation: to enable 5v logic to communicate with 5v analog signals * typical ?break before make? built in ? ordering information ordering number lead free halogen free package packing U74HC4053l-d16-t U74HC4053g-d16-t dip-16 tube U74HC4053l-s16-r U74HC4053g-s16-r sop-16 tape reel U74HC4053l-p16-r U74HC4053g-p16-r tssop-16 tape reel
U74HC4053 cmos ic unisonic technologies co., ltd 2 of 9 www.unisonic.com.tw qw-r502-373.a ? pin configuration 7 6 5 4 3 2 1 14 13 12 10 11 15 16 2y1 2y0 3y1 3z 3y0 e v ee v cc 2z 1y1 s1 1y0 1z s2 8 9 gnd s3 ? function table input(e ) input(sn) channel on l l ny0 to nz l h ny1 to nz h x none note : h=high voltage level ; l=low voltage level ; x=don?t care ? schematic diagram (one switch) v cc v cc z y v ee from logic v cc v cc v ee v ee
U74HC4053 cmos ic unisonic technologies co., ltd 3 of 9 www.unisonic.com.tw qw-r502-373.a ? function diagram
U74HC4053 cmos ic unisonic technologies co., ltd 4 of 9 www.unisonic.com.tw qw-r502-373.a ? absolute maximum ratings parameter symbol ratings unit supply voltage v cc -0.5 ~ +11.0 v input clamping current ( v in < -0.5v or v in > v cc +0.5v) i ik 20 ma switch clamping current ( v s < -0.5v or v s > v cc +0.5v) i sk 20 ma switch current (v s =-0.5v to v cc +0.5v) i s 25 ma negative supply current i ee -20 ma ground supply current i gnd -50 ma quiescent supply current i cc 50 ma dip-16 750 mw power dissipation sop-16/tssop-16 500 mw dip-16 12 mw/k derate above ta > 70c sop-16/tssop-16 p d 8 mw/k operating temperature t opr -40~+125 c storage temperature t stg -65 ~ + 150 c note: absolute maximum ratings are those values beyo nd which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied. ? recommended operating conditions parameter symbol conditions min typ max unit v cc -gnd 2.0 5.0 10.0 v supply voltage difference v cc v cc -v ee 2.0 5.0 10.0 v input voltage v in gnd v cc v switch voltage v sw v ee v cc v v cc =2.0v 6.0 1000 ns v cc =4.5v 6.0 500 ns v cc =6.0v 6.0 400 ns input rise and fall times t r , t f v cc =10.0v 6.0 250 ns ? static characteristics (ta=25c) parameter symbol test conditions min typ max unit v cc =2.0v 1.5 1.2 v v cc =4.5v 3.15 2.4 v v cc =6.0v 4.2 3.2 v high-level input voltage v ih v cc =9.0v 6.3 4.7 v v cc =2.0v 0.8 0.5 v v cc =4.5v 2.1 1.35 v v cc =6.0v 2.8 1.8 v low-level input voltage v il v cc =9.0v 4.3 2.7 v per channel 0.1 a analog switch off-state current i s(off) v cc =10v, v ee =0v, v i =v ih or v il |v s |=v cc - v ee all channels 0.1 a analog switch on-state current i s(on) v cc =10v, v ee =0v, v i =v ih or v il |v s |=v cc - v ee 0.1 a v cc =6v 0.1 a input leakage current i i(leak) v ee =0v v i =v cc or gnd v cc =10v 0.2 a v cc =6v, v ee =0v 8 a quiescent supply current i q v i =v cc or gnd v is =v ee or v cc v os =v cc or v ee v cc =10v,v ee =0v 16 a
U74HC4053 cmos ic unisonic technologies co., ltd 5 of 9 www.unisonic.com.tw qw-r502-373.a ? static characteristics(cont.) parameter symbol test conditions min typ max unit v ee =0v , i s =0.1ma (note) v cc =2.0v ? v ee =0v, i s =1ma v cc =4.5v 100 180 ? v ee =0v, i s =1ma v cc =6.0v 90 160 ? peak r on(peak) v is =v cc to v ee v in =v ih or v il v ee =-4.5v, i s =1ma v cc =4.5v 70 130 ? v ee =0v , i s =0.1ma (note) v cc =2.0v 150 ? v ee =0v, i s =1ma v cc =4.5v 80 140 ? v ee =0v, i s =1ma v cc =6.0v 70 120 ? v is = v ee v in =v ih or v il v ee =-4.5v, i s =1ma v cc =4.5v 60 105 ? v ee =0v , i s =0.1ma (note) v cc =2.0v 150 ? v ee =0v, i s =1ma v cc =4.5v 90 160 ? v ee =0v, i s =1ma v cc =6.0v 80 140 ? on-state resistance rail r on(rail) v is = v cc v in =v ih or v il v ee =-4.5v, i s =1ma v cc =4.5v 65 120 ? v ee =0v , i s =0.1ma (note) v cc =2.0v ? v ee =0v, i s =1ma v cc =4.5v 9 ? v ee =0v, i s =1ma v cc =6.0v 8 ? maximum on-state resistance variation between any two channels r on(max) v is =v cc to v ee v in =v ih or v il v ee =-4.5v, i s =1ma v cc =4.5v 6 ? note: at supply voltages (v cc - v ee ) approaching 2.0 v the analog swit ch on-resistance becomes extremely non-linear. therefore it is recommend ed that these devices be used to transmit digital signals only, when using these supply voltages. ? dynamic characteristics (ta=25c, gnd=0v, t r =t f =6ns, unless otherwise specified) parameter symbol test conditions min typ max unit v cc =2.0v 15 60 ns v cc =4.5v 5 2 ns v ee =0v v cc =6.0v 4 10 ns propagation delay form v is to v os t phl /t plh r l = c l =50pf v ee =-4.5v v cc =4.5v 4 8 ns v cc =2.0v 60 220 ns v cc =4.5v 20 44 ns v ee =0v v cc =6.0v 16 37 ns r l =1k ? , c l =50pf v ee =-4.5v v cc =4.5v 15 31 ns os v to e r l =1k ? , c l =15pf v ee =0v v cc =5.0v 17 ns v cc =2.0v 75 220 ns v cc =4.5v 25 44 ns v ee =0v v cc =6.0v 20 37 ns r l =1k ? , c l =50pf v ee =-4.5v v cc =4.5v 15 31 ns turn-on time sn to v os t pzh /t pzl r l =1k ? , c l =15pf v ee =0v v cc =5.0v 21 ns v cc =2.0v 63 210 ns v cc =4.5v 21 42 ns v ee =0v v cc =6.0v 17 36 ns r l =1k ? , c l =50pf v ee =-4.5v v cc =4.5v 15 29 ns os v to e r l =1k ? , c l =15pf v ee =0v v cc =5.0v 18 ns v cc =2.0v 60 210 ns v cc =4.5v 20 42 ns v ee =0v v cc =6.0v 16 36 ns r l =1k ? , c l =50pf v ee =-4.5v v cc =4.5v 15 29 ns turn-off time sn to v os t phz /t plz r l =1k ? , c l =15pf v ee =0v v cc =5.0v 17 ns note: v is is the input voltage at a nyn or nz te rminal, whichever is assigned as an input. v os is the output voltage at a nyn or nz te rminal, whichever is assigned as an output.
U74HC4053 cmos ic unisonic technologies co., ltd 6 of 9 www.unisonic.com.tw qw-r502-373.a ? test circuits and waveforms for off-state current low yn nz v in =v cc or v ee v out =v ee or v cc v ee from select input a a for on-state current for r on
U74HC4053 cmos ic unisonic technologies co., ltd 7 of 9 www.unisonic.com.tw qw-r502-373.a ? test circuits and waveforms(cont.) for ac performance pulse generator d.u.t r l switch v cc open r t v i v os c l v cc v is gnd v ee input test switch v is t r ,t f t pzh v ee v cc 6ns t pzl v cc v ee 6ns t phz v ee v cc 6ns t plz v cc v ee 6ns t plh open pulse 6ns t phl open pulse 6ns note: definitions for test circuit: r l = load resistance c l = load capacitance including jig and probe capacitance. r t = termination resistance should be equal to the output impedance z o of the pulse generator. t r =t f =6 ns; when measuring f max , there is no constraint to tr and tf with 50% duty factor( < 2ns).
U74HC4053 cmos ic unisonic technologies co., ltd 8 of 9 www.unisonic.com.tw qw-r502-373.a ? test circuits and waveforms(cont.) the input (v is ) to output (v os ) propagation delays waveform v os output v is input t plh t phl v in 50% 50% 50% 50% the turn-on and turn-off times waveform vos output t phz t pzh t plz t pzl output e,sn input 50% 50% 90% 10% t r t f 10% 90% 50% 50% swith on swith off swith on note: v i =gnd to v cc 90% 10% v in 0v input pulse definition
U74HC4053 cmos ic unisonic technologies co., ltd 9 of 9 www.unisonic.com.tw qw-r502-373.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
